Refreshing the Sealer on a Flagstone Floor

This property was situated in the tiny, yet picturesque village of Grafton Underwood in Kettering, Northamptonshire. The village has only a population numbering a few hundred and, interestingly enough, is the childhood home of the famous ‘Bridget Jones’ character. I have previously worked on a number of floors in Grafton Underwood, and on this particular occasion I was called to complete the job through a recommendation – which is always welcome!

This particular customer had two floors that needed re-finishing; the first was a polished Limestone tiled conservatory (which I will cover in a separate post as the process was different) and the second a Flagstone tiled living room; so on a rather dull day in November, I began my work.

Stripping a Flagstone tiled floor

The sealer on the Flagstone tiled living room had failed in certain places, resulting in the floor becoming difficult to clean due to dirt becoming ingrained in the stone. The decline in the sealer is not uncommon, as they do wear down over time – especially in an area of high traffic like a living room. To resolve this issue, the old surface seal needed to be stripped back and re-sealed.

Flagstone Sitting Room Grafton Underwood Before Cleaning

To remove what was left of the old sealer, I applied a dilution of Tile Doctor Remove and Go and scrubbed it into the floor using a rotary machine fitted with black stripping pads. I then gave the floor an initial rinse, before paying special attention to scrubbing the stubborn spots, making sure all of the sealer was removed.

I then gave the floor an acid wash using Tile Doctor Grout Clean-Up in order to remove grout haze and other mineral deposits which were evident. Due to its acidic properties, you have to be very careful with this product on any type of stone, so I didn’t let it dwell for too long and made sure the floor was thoroughly rinsed down afterwards, with all solutions extracted using a wet-vac machine.

Sealing a Flagstone tiled floor

The floor was left to dry for more than 24 hours, before I returned to re-seal it using Tile Doctor Seal & Go. This product provides both a stain resistant surface seal and the durable low-sheen finish requested by my client. Seal & Go is suitable for use on internal unsealed, porous surfaces.

Flagstone Sitting Room Grafton Underwood After Cleaning

I guess the photographs don’t really do the transformation justice however the freshly re-sealed Flagstone living room certainly brightened up what was a very dreary autumn day!
 
 
Source: Sandstone Floor Cleaning and Sealing service in Northamptonshire

Refreshing A Flagstone Floor

Here’s a job I completed not too long ago in the town of Maldon, which sits alongside the Blackwater estuary in South Essex. Although the Flagstone tiled floor in my client’s kitchen was – generally speaking – in good physical condition, the surface seal had worn down over time, leaving the tiles looking dull and lifeless.

Flagstone is quite a hard wearing stone that is commonly used for both internal and external surfaces, whether this is something as simple as a kitchen floor, or something more complex like a public monument. I was commissioned to restore the floor back to looking it best, by way of a thorough clean and a new seal.

Flagstone Floor Before Cleaning Maldon

Cleaning a Flagstone tiled floor

My go to cleaner for most kinds of natural stone tile is Tile Doctor Pro-Clean, a high alkaline product which contains both cleaning and stripping properties depending on the dilution ratio. In this case I wanted a strong solution so I could strip off any remaining sealer and so it was diluted one part Pro-Clean to three parts clean water. The solution was left to dwell for 10 minutes, allowing it to soak into the stone and get to work breaking down any remaining sealer.

I then attached a black scrubbing pad to my rotary machine, and used this to agitate the solution into the tiles. This helped to lift out any ingrained dirt and remove the stubborn marks blemishing the floor. Once the initial clean had been completed, I turned my attention to the grout between the tiles, using Pro-Clean in combination with a stiff grout brush to clean up the grout as much as possible. I cleaned the floor twice in total before rinsing the entire area with water and leaving the house for a few days, giving the surface time to dry.

Sealing a Flagstone tiled floor

Upon my return to the house, I ran some damp tests to double check that the floor had dried completely. This is important as any residual moisture can potentially damage the performance of the sealer. Once I was satisfied that the tiles were able to take the seal, I applied two coats of Tile Doctor Colour Grow sealant.

Flagstone Floor After Cleaning Maldon

Colour Grow is an impregnating sealer that seeps into the pores of the stone provides durable stain protection from within, along with a nice finish. It’s also specially designed to intensify the natural shades and colours in the stone, turning dull floors into characterful household features. Colour Grow is suitable for use most stone surfaces, including Flagstone, Limestone, Marble, Quarry, Sandstone and Slate.

My customer was very pleased with the result, with marked differences in condition and appearance achieved in the space of a few short days.

Flagstone Floor During Sealing Maldon

 
 
Source: Professional Shower Tile, Stone and Grout cleaning and maintenance services in Essex

Putting the shine back on water damaged Yorkstone tiles

The photographs below are from a Yorkstone flagged floor at a house in the market town of Devizes in Wiltshire. The customer had contacted me as the floor was quite dirty and was overdue for a deep clean.

Cleaning Yorkstone Flagstone Floor in Devizes Before

Cleaning Yorkstone Paving Flags

The floor was quite dirty so I started by making a strong dilution of Tile Doctor Pro-clean mixed 50/50 with NanoTech Ultraclean to add more abrasive power; the solution was spread liberally all over the floor and was left to soak into the stone for a good ten to fifteen minutes. Next using a strong poly brush attached to a rotary machine I scrubbed to floor to bring out all the dirt trapped in the riven areas. Next I attached a black scrubbing pad to give the floor an extra aggressive clean.

I then used a wet vacuum to remove the by now very dirty cleaning solution and then rinsed the floor tiles using clean water and a stiff deck brush several times to ensure that all the product and dirt was removed thoroughly.

At this point it became evident that there were several paint blemishes and spots probably from decorating all over the flagstones so I applied Tile Doctor Remove and Go to the affected areas giving it ten minutes to dwell before agitating all the solution with a stiff deck brush and a floor scraper. Once all the paint was removed I then rinsed the floor again several times with clean water and a stiff deck brush to thoroughly remove any product.

Upon completion I advised the customer that it would be beneficial to seal the stone as it would protect it from staining and make it easier to clean however the house was due to be rented out and having little control over what would be used to maintain the floor going forward he was adamant that he only wanted it cleaned.

Cleaning Yorkstone Flagstone Floor in Devizes After

Source: Residential and Commercial Tile Cleaning Services in Wiltshire