George 3rd Flagstones Floor Renovated in a Cotswolds Cottage

Minchinhampton is an ancient market town located on a hilltop in the Cotswolds area of Gloucestershire, famous for being one of the UK’s areas of outstanding beauty. The town has a long history and many of the residents live in some truly picturesque and characterful cottages that date back to the 18th century and beyond.

I was recently contacted by a property owner in the village. She had just uncovered an original Flagstone tiled floor in her cottage, which dates to 1765. The floor had previously been covered by a wooden floor and the property owner was keen to see if I could restore it. We’ve had some fantastic success with restoring similar floors in the past, so I was more than happy to see what could be done.

I visited the property initially to conduct a test clean and check that I would be able to remove the copious wood adhesive left on the floor after the covering had been lifted. This test clean was successful, and the customer booked me in for complete the full restoration straight away.

Old Flagstone Floor Before Restoration at Minchinhampton Cottage

Cleaning a Dirty Flagstone Tiled Floor

My first action in the process of restoring the floor was to mix a strong solution of two products – Tile Doctor NanoTech HBU and Tile Doctor Remove and Go. Remove and Go is designed to strip away any old sealer on the floor and dissolve any adhesive and paint stains, while NanoTech HBU is a potent cleaner which uses nano-sized particles to penetrate deep into the stone and eliminate ingrained dirt.

This solution was applied across the floor and left to dwell for 40 minutes. Then, using a poly-brush fitted to a floor buffing machine, I cleaned the floor and in doing so removed 85 percent of the ingrained dirt. To tackle the rest of the ingrained dirt, I spot cleaned the stubborn area using Tile Doctor Acid Gel in combination with a handheld steamer. Acid Gel is a concentrated mix of phosphoric and hydrochloric acids.

I also used a handheld buffing machine fitted with a Coarse 100 grit diamond encrusted pad to grind away any outstanding dirt and level off the surface of the tiles. When I was satisfied with the results of the cleaning process, my next operation was to replace all the missing grout on the floor. I did this using a Limestone grout, which was a good colour match for the Flagstone.

Sealing a Flagstone Tiled Floor

With the first day of work complete, I left the floor to dry out for the next three days. With the floor being particularly old, it was important to give it a long period to dry to help avoid any damp issues.

Upon returning to the property, I ran some quick damp tests to check the floor could be sealed. When satisfied that there was no excess moisture to deal with, I proceeded to seal the floor with three coats of Tile Doctor Seal and Go, leaving 30 minutes to dry between coats. This will give the floor robust protection against ingrained dirt along with the high-quality satin finish the customer had requested.

Old Flagstone Floor Before Restoration at Minchinhampton Cottage

Seeing the result, the customer was really pleased with her floor. She had previously thought there was nothing that could be done to restore these old Flagstones, but with the right combination of products and cleaning methods I was able to achieve a fantastic restoration. Another satisfied customer.
 
 
Source: Sandstone Tile Cleaning and Restoration in Cotswolds

Restoring Salvaged Flagstone Flooring in a Gloucestershire Kitchen

Here we have an interesting situation in which an old Flagstone tiled floor had been salvaged from a cottage approximately 30 years ago and subsequently reinstalled at a house in Ledbury, a small market town which lies to the west of the Malvern hills in the North of Gloucestershire. Since being reinstalled, the Flagstone tiles had been barely touched in terms of maintenance for three decades and so the stone and grout were naturally in need of a deep clean and seal!

Salvaged Flagstone Floor Before Restoration in Ledbury

The property owner had heard about the natural stone tile restoration services Tile Doctor provides and so booked me in to see what could be done to improve the condition of his floor.

Salvaged Flagstone Floor Before Restoration in Ledbury

Cleaning a Dirty Flagstone Tiled Floor

My first job in the cleaning process was to distribute a mixed solution of two cleaning products across the floor. These products were Tile Doctor Remove and Go, which is a multi-purpose stripper designed to remove old coatings and sealers, as well as any adhesive and paint stains, and Tile Doctor NanoTech HBU, a powerful cleaner which utilises nano-sized particles to penetrate difficult-to-reach areas of the stone to eliminate deep lying dirt and stains.

This potent cleaning solution was left to dwell on the surface of the floor for 45 minutes before being worked deep into the stone with a poly brush fitted to a buffing machine. The resultant cleaning slurry was then hoovered up with wet-and-dry vacuum. Next, the floor was rinsed and cleaned with just clean water and the slurry was once again hoovered up.

Salvaged Flagstone Floor During Restoration in Ledbury

This left the tiles clean and fresh, so I turned my attention to cleaning the grout lines in detail, which also involved spot cleaning any stubborn grout smears with Remove and Go and Tile Doctor Acid Gel, which is a blend of Phosphoric and Hydrochloric acids in gel form designed to remove stains of this kind.

When satisfied with the result of the cleaning process, I rinsed the floor for a final time with fresh water, hoovered up as much moisture as possible with a wet vacuum and left the stone to dry off fully overnight.

Sealing a Flagstone Tiled Floor

On arrival at the property the following day, I checked the floor for dampness with my damp meter. The test proved that no excess moisture was present, so I proceeded to give the Flagstone a fresh seal.

With regards to sealer choice, the customer had requested a natural-looking matte finish to match in with the rustic characteristics of the Flagstone, so I used Tile Doctor Colour Grow – which provides exactly that. Colour Grow is a durable impregnating sealer that also enhances the natural shades in the stone to really bring the whole floor back to life. Roughly an hour was left between the application of each coating of sealer to allow the floor dry before applying the next.

Salvaged Flagstone Floor After Restoration in Ledbury

The result was a noticeable improvement in the condition and appearance of the Flagstone – and the customer couldn’t have been happier. It’s always satisfying to breathe some new life into old natural stone tiles.

Salvaged Flagstone Floor After Restoration in Ledbury

 
 
Source: Flagstone Tile Restoration in Gloucestershire

Levelling and Restoring a Flagstone Kitchen Floor in Lancashire

Flagstones are a durable Sandstone based material that give a solid feel to any floor, however while large and impressive to look at they can be very rough and un-even. This isn’t so much of a problem when Flagstones are used externally for patios and pathways, but rough surfaces trap dirt and when these tiles are used internally, they are much easier to maintain if the stone is smooth and sealed.

This customer, who lives in the Lancashire town of Haslingden, had this problem with their Flagstone tiled floor and like most things related to tile, stone and grout we have a solution in the form of a process known as milling. This basically involves grinding down the surface of the tile using coarse diamond encrusted pads to make it smooth.

Flagstone Floor Before Milling Haslingdon Flagstone Floor Before Milling Haslingdon

The customer booked me in to get the job done, having seen some previous milling work of ours on our website and liking what we had achieved for other people with similar floors.

Flagstone Floor Before Milling Haslingdon

Milling an Uneven Flagstone Tiled Floor

Milling the stone involves the use of a set of thee millings pads of different grades (50, 100 and 200 grit) which are applied in sequence. You start with the coarse and abrasive 50 grit milling pad and follow this by smoothing this surface with the finer 100 and 200 diamond grit milling pads. Water is used to lubricate and capture the dust which is created during the process resulting in a slurry which needs to be rinsed away and extracted between each pad. The process requires the use of a solid weighted rotary machine and a fair bit of muscle power to guide it.

We successfully managed to mill the Flagstone tiles virtually flat in places and the process removed the unappealing stained and dirty layer of stone that was ruining the appearance of the floor. Interestingly we usually find that by grinding away the old and dirty layer of stone the true colour of the tiles that had been hidden under many years’ worth of muck is revealed. Unfortunately, in this case, due to the darkness of this stone it was difficult to see a great deal of colour change.

Sealing Flagstone Floor Tiles

Finally, the floor needed to be sealed to protect against future instances of staining and ingrained dirt. To do this I sealed the tiles using several coats of Tile Doctor Colour Grow, which is an impregnating, colour enhancing sealer that soaks into the pores of the stone and occupies that space preventing dirt from become ingrained. The sealer also leaves a matte, natural looking finish, which is a perfect match for the rustic character of the Flagstone tiles.

Flagstone Floor After Milling Haslingdon Flagstone Floor After Milling Haslingdon

Now that the floor has been levelled and sealed, the surface is smooth and protected. This means the customer will not be ruining any more mops when the cleaning bucket comes out!

Flagstone Floor After Milling Haslingdon

 
 
Source: Tile and Stone Cleaning and Restoration in Lancashire