Sealing Tips for Sandstone Kitchen Floor Tiles

I can’t stress how important a sealer is when it comes to maintaining the look of a stone floor and although they can protect a floor for many years if not maintained they will all but disappear in high traffic areas allowing dirt and stains to penetrate the pores of the stone. This gradual degradation occurs over such a long period it usually happens without being noticed.

This Sandstone tiled kitchen floor and entrance hall at a barn conversion property in Sleaford had not been sealed in eight years. Since Sandstone is naturally highly porous, dirt and staining had easily become easily ingrained in the tiles. The result? A very dull and poor looking set of tiles.

Sandstone Floor Before Cleaning Sleaford Sandstone Floor Before Cleaning Sleaford

After difficulties trying to resolve the situation by themselves, the property owners asked me to deep clean the tiles to restore the appearance of the Sandstone which had faded over the years. Thankfully we have the right products, equipment, and experience to be able to carry out the restoration quickly and efficiently.

Cleaning a Dull and Dirty Sandstone Tiled Floor

The first day of work involved preparing the area by protecting other surfaces and removing the kickboards form under the kitchen units. This was followed by a deep clean of the floor firstly with our high pressure Rotovac system which applies hot water under high pressure to force out ingrained dirt and muck from the stone whilst simultaneously extracting the soil back to a tank on our van. I followed this by scrubbing and rinsing the tiles and grout with a solution of Tile Doctor Pro-Clean, a high alkaline powerful cleaner we use on natural stone floors. This helped to tackle any particularly deeply ingrained dirt and clean up the grout.

Sandstone Floor During Cleaning Sleaford Sandstone Floor During Cleaning Sleaford

Following the clean, I installed turbo dryers and used the already in-built underfloor heating to dry the Sandstone, which was necessary as it is naturally a very porous stone and easily absorbs moisture.

Sandstone Floor After Cleaning Sleaford

Sealing a Sandstone Tiled Floor

On the second day, the tiles were completely dry and ready to be sealed however before sealing I asked for the underfloor heating to be switched off so the fresh sealer would cure more naturally. To seal the floor, I opted to use Tile Doctor Colour Grow which is an impregnating sealer that occupies the pores in the Sandstone so dirt can’t, additionally it’s formulated to enhance the naturally occurring colours in the Sandstone – those which after such a long time the customer was keen to see again.

Sandstone Floor During Sealing Sleaford

After two coats of Colour Grow were applied, the transformation was well and truly complete. The customer was also well and truly happy. After eight years, the Sandstone tiles were restored to better than their original condition.

Sandstone Floor After Sealing Sleaford

One question I often get asked is how do you know when your sealer has worn down. The answer is to conduct a water test on your tiles, if the water forms a bubble on the surface of the tile as in the photo below then it shows the sealer is doing its job.

Sandstone Floor After Cleaning Sleaford

 
 
Source: Sandstone Tile and Grout Cleaning and Restoration Service in Lincolnshire

Removing Stains for Sandstone Flagstones

Recently, I was asked to visit a property in the small port town of Boston, Lincolnshire, to quote for a clean and seal. My client had recently moved into a new home, but the riven natural Sandstone flagstone floor had not been properly cared for or sealed by the previous owners and was now in need of a thorough clean. Sandstone flagstones are a popular choice for both residential and commercial use, and are especially popular in kitchens and hallways.

This particular floor was blemished by noticeable stains that had seeped into the stone. Further liquid stains were visible in other areas of the floor, as they had soaked into the stone due to the lack of a surface sealer. My primary tasks would be removing these blemishes and to provide a stain resistant surface seal to prevent damage in the future. My client also requested a natural look finish to the floor rather than a topical shine seal.

Riven Flagstone Floor Before Cleaning Boston Riven Flagstone Floor Before Cleaning Boston

Cleaning a stained Flagstone tiled floor

This was a two day job. On day one, my main focus was on eliminating the stubborn stains on the stone tiles. I mixed a strong solution of Tile Doctor Pro-Clean, a high alkaline cleaner, with water to tackle the heavy soil build-up and applied the solution to the floor in sections leaving it to dwell for a short period first so it could get underneath the dirt and lift it to the surface.

I then used a combination of a stiff brush and a specialist Rotovac machine to scrub and clean the floor. The Rotovac uses water under high pressure to clean the floor and is highly effective in eliminating the difficult-to-reach dirt, particularly where it might be hidden due to the riven nature of the tiles. The cleaning process was repeated until I was satisfied with the results.

Sealing a Flagstone tiled floor

After finishing the clean I left the house, allowing the floor to dry off overnight. On day two, I returned to the house and ran damp tests to ensure that the surface was completely dry before commencing the seal.

Riven Flagstone Floor During Sealing Boston

My choice of sealer was Tile Doctor Colour Grow. As an impregnating sealer, this product soaks into the stone to provide robust protection from within. It also contains a colour intensifier and so, as you can see from the photographs, it really helped to enhance the natural shades in the Sandstone.

Riven Flagstone Floor After Sealing Boston

My client was delighted with the results and I think you will agree the floor looks transformed and much more appealing. Additionally the sealer is now protecting the stone from staining and liquids form puddles on the surface of the tile instead of soaking into its pores.

Riven Flagstone Floor After Sealing Boston

 
 
Source: Professional Tile, Stone and Grout cleaning and maintenance services in Lincolnshire

Stone Tile Maintenance

Details below of a Natural Riven Stone tiled floor installed in the Kitchen of a house in Boston, Lincolnshire. The client had previously sealed this floor with a commonly available sealer and found the results unsatisfactory; the floor had a riven surface and that combined with two large dogs made cleaning was a constant burden.

Natural Stone Floor in Boston Before

Natural-Stone Tile Cleaning

The first step was to remove the existing sealer and give the floor a thorough clean; fortunately we were able to do this using a strong dilution of Tile Doctor Pro-Clean which is a multipurpose cleaner/stripper. Pro-Clean was applied to the floor and then left to dwell for a good twenty minutes giving it time to break down the remaining sealer before being worked in using a rotary machine fitted with a black scrubbing pad. To get the grout clean we made up a further batch of Pro-Clean, this time with warm water and scrubbed it by hand into the grout lines using a stiff grout brush.

The soiled cleaning solution was removed using a wet vacuum and the floor given a thorough rinse using clean water. Stubborn areas were re-treated using the same process and the floor was left to dry overnight assisted with a turbo air blower.

Natural Stone Floor in Boston Stripped

Sandstone Tile Sealing

The next morning we applied three coats of Tile Doctor Seal and Go to the tiles with each coat taking around twenty minutes to dry. Seal and Go is an ideal sealer for natural stone flooring and being water based there are no nasty smells to worry about like most solvent based products. Seal and Go also added a nice subtle sheen to the floor and will protect the tiles for years to come.

Natural Stone Floor in Boston Resealed

The customer was delighted with the results.
 
 
Source: Natural Stone Tile Maintenance